對于汽車來說剎車系統很重要，從組成來看剎車系統主要有三部分，分別是操縱系統、液壓系統、助力系統，駕駛車輛的過程中要注意剎車系統，那么剎車不靈敏了要踩很深怎么解決？
濟南奔馳汽車維修廠家在此講解4點。
The brake system is very important for cars. From the composition, the brake system mainly consists of three parts, namely, the control system, the hydraulic system, and the power assist system. Pay attention to the brake system when driving the car. How to solve the problem if the brake is insensitive and you step on it deeply? Jinan Benz auto maintenance manufacturer will explain 4 points here.
1、檢查剎車油壺，尤其是剛更換了剎車油，因為剎車管路中的空氣沒有排干凈，導致剎車壺里有空氣，這樣車輛剎車的時候就會感覺不靈敏。建議到4s店進行處理，將空氣排出才可以。
1. Check the brake oil reservoir, especially the brake oil that has just been replaced. Because the air in the brake pipe is not completely discharged, there is air in the brake oil reservoir, which makes the car insensitive when braking. It is recommended to go to the 4S store to have the air removed.
2、剎車片容易磨損，一旦出現了嚴重的磨損，整體的厚度就會變薄，這樣一來駕駛車輛的時候就需要深踩，也就是踩的很深才可以達到原有的制動效果，這個情況需要更換剎車片。
2. The brake pads are easy to wear. Once serious wear occurs, the overall thickness will become thinner. In this way, you need to step deeply when driving the vehicle, that is, you can achieve the original braking effect by stepping deeply. In this case, you need to replace the brake pads.
3、剎車油不足的話也會造成剎車不靈敏，這個情況需要檢查一下，主要看一下剎車油壺內的剎車油液是不是在min和max刻度之間，如果剎車油低于min刻度的話，就表示剎車油不足，這個情況需要及時添加剎車油，才可以。
3. If the brake oil is insufficient, it will also cause the brake to be insensitive. This situation needs to be checked, mainly to see if the brake oil in the brake oil pot is between the min and max scales. If the brake oil is lower than the min scale, it means that the brake oil is insufficient. In this case, you need to add brake oil in time.
4、真空助力泵是用來提供助力的，這個部件可以讓駕駛員輕松踩下剎車踏板。踩下剎車踏板后，制動總泵會通過制動液來推動制動分泵，此時制動分泵可以推動剎車片夾緊剎車盤，這樣汽車就可以減速了。制動分泵就是我們平時所說的剎車卡鉗，剎車卡鉗內是有很多活塞的，這些活塞的作用是推動剎車片。
4. The vacuum booster pump is used to provide power assistance, which allows the driver to easily step on the brake pedal. After stepping down the brake pedal, the brake master cylinder will push the brake wheel cylinder through the brake fluid. At this time, the brake wheel cylinder can push the brake pad to clamp the brake disc, so that the car can decelerate. The brake wheel cylinder is what we usually call the brake caliper. There are many pistons in the brake caliper, which are used to push the brake pads.
We have already explained how to deal with the problem that the brake is not sensitive and needs to be pressed deeply. You can come to our website at any time for any doubts or needs http://m.cnjqf.com Ask about it!
